23 februari 2017

SWIX VALLATIPS SWIX WAX TIPS BEFORE
INFÖR KORTVASAN "KORTVASAN"

GÄLLANDE TORSDAG 24.02.2017

FOR THURSDAY February 24th 2017



Detta vallatips är baserat på väderleksprognoser och testning.

TEMPERATURPROGNOS
Oxberg kl. 10.00 -7ºC
Hökberg kl. 11.00 -4ºC
Mora kl. 12.00 -2ºC

STRUKTUR
Stenslipade skidor: Medium. Kom ihåg att rill ovanpå stenslip ofta ger bättre glid.
Swix Rilljärn:1,00 mm rätt (vals som präglar en rätt struktur) (T423/T406).

GLID - Alternativ 1:
1. Värm in LF6X, låt kallna. Värm in en gång till, efter avkylning sickla av med plexisickel och borsta med Swix brons- eller stålborste.
2. Avsluta med Swix blå nylon poleringsborste.

GLID - Alternativ 2 - racing:
1. Värm in HF6X låt kallna. Värm in en gång till, efter avkylning sickla av med plexi sickel och borsta med Swix brons- eller stålborste.
2. Lägg på Cera F FC6X. Använda vallajärn på ca. 165°C. Dra järnet snabbt över belaget. Vänta i ca. 10 min. och borsta bort från belaget med en hästhårs- eller vildsvinsborste.
3. Avsluta med Swix blå nylon poleringsborste.

FÄSTE:
1. Rugga fästzonen med slippapper #100 (Swix T330 el. T0011).
2. Lägg på ett lager VG35 grönt grundvax. Låt kalna.
3. Lägg på 2-3 lager V40 blå extra burkvalla.
4. Avsluta med 2-3 lager VR45 ljus lila burkvalla.
5. Vid senare start än kl 11 kan man använda VR50 istället för VR45.


Detta var dagens vallarekommendation inför Vasaloppsveckan.

Vil du lära dig mer om hur du lägger klister och glidvalla gå in på swixschool.com.


LYCKA TILL!

These wax tips are based on weather prognoses and testing.

TEMPERATURES
Sälen kl. 10.00 -7ºC
Evertsberg kl. 11.00 -4ºC
Mora kl. 12.00 -2ºC

STRUCTURE
Stone ground skis: Medium structure. Remember to use hand structure on stone ground skis for better glide.
Swix Structure Tools: Imprint Tool Roller (T423/T406) “Straight”: 1.00 mm (imprint roller that gives straight structure)

GLIDE - Alternative 1:
1. Iron in LF6X. Let cool off. Iron in once more and let cool off. Scrape off with a Swix Plexi Scraper, and brush with a Swix Bronze or Steel Brush.
2. Finish with the Blue Nylon Polish Brush.

GLIDE - Alternative 2:
1. Iron in one layer of HF6X. Let cool off. Iron in once more and let cool off. Scrape off with a Swix Plexi Scraper, and brush with a Swix Bronze or Steel Brush.
2. Apply Cera F FC6X with an iron temperature of approx. 165°C. Make one fast continuous pass with the iron with a constant pressure – take one side of the groove at the time. Let cool approx 10 min. Brush the excess powder thoroughly away with a horsehair- or wild boar brush.
3. Finish with the Blue Nylon Polish Brush.

GRIP:
1. Sand (rub) the grip zone area with #100 grit silicon sandpaper (Swix T330 or T0011).
2. Iron in one layer of VG35 Green Base Wax. Let cool off.
3. Apply 2-3 layers of V40 Blue Extra Grip Wax.
4. Apply 2-3 layers of of VR45 Light Violet Grip Wax.
5. If you start later than 11 a.m. you can use VR50 instead of VR45.


This is our recommendation for today’s conditions in the Vasaloppet track.

For more information on how to apply gliders and grip waxes please visit swixschool.com.


We wish everybody a nice trip!

Inga kommentarer: